Connexion

 


Sodimed sur FacebookSodimed sur TwitterSodimed sur Youtube
0 Total TTC : 0,00 € Demander un devis
Pas de produit sélectionné
Mon devis Close
×

Annonce

Désolé, mais le produit demandé n'a pas été trouvé
id 172 de la catégorie ZIRCONE non publiée

Remise fidelité à partir de 10 disques achetés

  • {vmproducts id=|394|}{/vmproducts}

  • {vmproducts id=|594|}{/vmproducts}

  • RAW MATERIAL

    Three Crystal States Of Zirconium Dioxide

    Monoclinic - Until 1170 °C
    Tetragonal - From 1170 °C until 2370 °C
    Cubic - Above 2370 °C
    CERAMICS RAW MATERIAL
    • The zirconia particles must have a tetragonal crystal structure (cubic for jewelry, monoclinic is weak)
    • The tetragonal structure is unstable in the mouth, just the right amount of stabilizing Yttria is needed (3.0 mol%)
    • Blanks must have this structure microscopically everywhere
    Yttria concentration: on average 3 mol%
    • Increased aging
    • Breaking
    • Shrinkage problems
    Yttria concentration: on average 3 mol% ...and 3 mol% in every particle
    • Slow aging
    • Evenly strong
    • Perfect shrinkage

    KEROX 100 year lifetime warranty

    Gamma Irridiaton

    PRESSING: DIFFERENCE IN TECHNOLOGIES

    QUALITY VS. QUANTITY
    KEROX MULTI PRESSING

    Kerox Dental Zirconia blanks are made Yttria stabilized on every single grain – manufactured by market leader Japanese company.

    CHEMICAL PROPERTIES
    IngredientsWeight percentage (%)
    ZrO2 > 94.10
    Y2O3 5.20
    Al2O3 0.25
    HfO2 < 0.30
    SiO2 ≤0.02
    Fe2O3 ≤0.01
    Na2O ≤0.04

    PHYSICAL PROPERTIES
    Typical properties of sintered body
    Density (g/cm3) 6.05
    Bending strength (MPa) 1500
    Surface hardness (HV10) 1250
    Radioactivity (Bq/g) < 0.01

    AXIAL PRESSING ONLY IS INSUFFICIENT
    • Pressure and mold densification are uneven
    • Different density, shrinkage, hardness
    COLD ISOSTATIC PRESSING
    • Extreme pressure
    • Even densification & mass
    • Less porosity
    • Less unevenness
    • Homogeneity

    KEROX DENTAL MULTI PRESSING

    Cold Isostatic pressing is time-consuming but it leaves less material stress and strain, than axial press. In Kerox Dental to the axially pre-pressed blocks an isostatic manufacturing process is applied – that’s Kerox Dental Multi Pressing. The all around, extreme pressure during the isostatic pressing ensures a maximum homogenous density in all Kerox Dental blocks. Optimal blank porosity and density decrease amortization of both the milling machine and the milling heads of the dental laboratory.

     

  • Chers clients,

     

    Il est important aujourd'hui d'avoir une totale confiance en son fournisseur et nous tâchons d'en faire autant avec nos fabricants.

     

    A ce titre, vous trouverez tous les documents réglementaires dont vous avez besoin :

    Si toutefois, d'autres documents vous sont nécessaires, n'hésitez pas à nous contacter.

     

    Marquage CE

    Norme ISO 13485

    Propriétés Mécaniques

     

    Matrice de sintérisation

    Matrice de coloration / Teintes VITA

     

     

    Une expérience importante dans le domaine des céramiques

    • 30 years of expertise in high precision ceramic manufacturing
    • Production of 60 million high tech ceramics annually
    • Continuous Research & Development
    • 100% Total Quality Management with testing laboratory
    • Satisfied customers worldwide

    Premium quality zirconia

    • Functional Bending Strength (up to 1500 MPa)
    • 100% Biocompatibility
    • Quality ingredients
    • Advanced technology
    • Isostatic pressing for the maximum homogenous density
    • Blanks for full-arch dental restorations

    Lifetime warranty

    • Guaranteed for life!
    • Most reliable performance
    • Best choice for durability
    • Made in European Union

     

     

  • COMMENT FAIRE UN BON CONTOUR :

     
    COMMENT BIEN USINER :
     
     
    COMMENT BIEN COLORER VOTRE ZIRCONE
     
     
  •  

    Nous vous prions de bien vouloir trouver notre liste de prix ZIRCONE valable jusqu'à fin 2015. 

     

    Liste de Prix  : Télécharger nos tarifs

     

     

     

     

ZIRCONE

Diamètre Zircone
Diamètres Zircone
Choisir une variante
Prix HT : 160,00 €
Prix TTC : 192,00 €
TVA : 32,00 €
Diamètre
DISQUES : diamètre 98.5mm PMMA et AUTRES
Teintes Katana
Teintes KATANA
Hauteur Zircone
DISQUES : Hauteur Disques KEROX
Prix HT : 160,00 €
Prix TTC : 192,00 €
TVA : 32,00 €
Diamètre
DISQUES : diamètre 98.5mm PMMA et AUTRES
Teintes Katana
Teintes KATANA
Hauteur Zircone
DISQUES : Hauteur Disques KEROX
Prix HT : 160,00 €
Prix TTC : 192,00 €
TVA : 32,00 €
Diamètre
DISQUES : diamètre 98.5mm PMMA et AUTRES
Teintes Katana
Teintes KATANA
Hauteur Zircone
DISQUES : Hauteur Disques KEROX
Prix HT : 99,25 €
Prix TTC : 119,10 €
TVA : 19,85 €
Diamètre
DISQUES : diamètre 98.5mm PMMA et AUTRES
Teintes Katana
Teintes KATANA
Hauteur Zircone
DISQUES : Hauteur Disques KEROX
Page 1 sur 17

  • {vmproducts id=|394|}{/vmproducts}

  • {vmproducts id=|594|}{/vmproducts}

  • RAW MATERIAL

    Three Crystal States Of Zirconium Dioxide

    Monoclinic - Until 1170 °C
    Tetragonal - From 1170 °C until 2370 °C
    Cubic - Above 2370 °C
    CERAMICS RAW MATERIAL
    • The zirconia particles must have a tetragonal crystal structure (cubic for jewelry, monoclinic is weak)
    • The tetragonal structure is unstable in the mouth, just the right amount of stabilizing Yttria is needed (3.0 mol%)
    • Blanks must have this structure microscopically everywhere
    Yttria concentration: on average 3 mol%
    • Increased aging
    • Breaking
    • Shrinkage problems
    Yttria concentration: on average 3 mol% ...and 3 mol% in every particle
    • Slow aging
    • Evenly strong
    • Perfect shrinkage

    KEROX 100 year lifetime warranty

    Gamma Irridiaton

    PRESSING: DIFFERENCE IN TECHNOLOGIES

    QUALITY VS. QUANTITY
    KEROX MULTI PRESSING

    Kerox Dental Zirconia blanks are made Yttria stabilized on every single grain – manufactured by market leader Japanese company.

    CHEMICAL PROPERTIES
    IngredientsWeight percentage (%)
    ZrO2 > 94.10
    Y2O3 5.20
    Al2O3 0.25
    HfO2 < 0.30
    SiO2 ≤0.02
    Fe2O3 ≤0.01
    Na2O ≤0.04

    PHYSICAL PROPERTIES
    Typical properties of sintered body
    Density (g/cm3) 6.05
    Bending strength (MPa) 1500
    Surface hardness (HV10) 1250
    Radioactivity (Bq/g) < 0.01

    AXIAL PRESSING ONLY IS INSUFFICIENT
    • Pressure and mold densification are uneven
    • Different density, shrinkage, hardness
    COLD ISOSTATIC PRESSING
    • Extreme pressure
    • Even densification & mass
    • Less porosity
    • Less unevenness
    • Homogeneity

    KEROX DENTAL MULTI PRESSING

    Cold Isostatic pressing is time-consuming but it leaves less material stress and strain, than axial press. In Kerox Dental to the axially pre-pressed blocks an isostatic manufacturing process is applied – that’s Kerox Dental Multi Pressing. The all around, extreme pressure during the isostatic pressing ensures a maximum homogenous density in all Kerox Dental blocks. Optimal blank porosity and density decrease amortization of both the milling machine and the milling heads of the dental laboratory.

     

  • Chers clients,

     

    Il est important aujourd'hui d'avoir une totale confiance en son fournisseur et nous tâchons d'en faire autant avec nos fabricants.

     

    A ce titre, vous trouverez tous les documents réglementaires dont vous avez besoin :

    Si toutefois, d'autres documents vous sont nécessaires, n'hésitez pas à nous contacter.

     

    Marquage CE

    Norme ISO 13485

    Propriétés Mécaniques

     

    Matrice de sintérisation

    Matrice de coloration / Teintes VITA

     

     

    Une expérience importante dans le domaine des céramiques

    • 30 years of expertise in high precision ceramic manufacturing
    • Production of 60 million high tech ceramics annually
    • Continuous Research & Development
    • 100% Total Quality Management with testing laboratory
    • Satisfied customers worldwide

    Premium quality zirconia

    • Functional Bending Strength (up to 1500 MPa)
    • 100% Biocompatibility
    • Quality ingredients
    • Advanced technology
    • Isostatic pressing for the maximum homogenous density
    • Blanks for full-arch dental restorations

    Lifetime warranty

    • Guaranteed for life!
    • Most reliable performance
    • Best choice for durability
    • Made in European Union

     

     

  • COMMENT FAIRE UN BON CONTOUR :

     
    COMMENT BIEN USINER :
     
     
    COMMENT BIEN COLORER VOTRE ZIRCONE
     
     
  •  

    Nous vous prions de bien vouloir trouver notre liste de prix ZIRCONE valable jusqu'à fin 2015. 

     

    Liste de Prix  : Télécharger nos tarifs

     

     

     

     

Nos partenaires

  • IPD
  • Em Exact
  • Kuraray Noritake
  • CEKA
  • Elod Medtech
  • Dyna
  • Rhein 83
  • LV
  • Microdent
  • Locator
  • New Anchorvis